●Multi-folded periphery of the enclosure to avoid water and sundries entering into the inner enclosure;
●Cold rolled steel welded frame with strong structure;
●All-round polyurethane gasket in the door with good protection;
●Molded door border with exquisite image and strong intensity;
●Door can be open from left or right;
●Door can be turned to 110 degrees with hinge, and 180 degrees with special hinge;
●Adjustable mounting panel;
●M8 earth pole is mounted on the body, door and the mounting panel;
●Mounting hole drilled at the back of the enclosure, no need extra holes
●SPCC cold rolled steel;
●Thickness: mounting panel: 2.5MM; others: 1.5mm.
●Body of enclosure and doors:
Degreasing, pickling, phosphoric, electrophoretic dip-coated printed, static power with textured stove enamel RAL7032;
●Mounting plate ( SPCC cold rolled steel):
Degreasing, pickling, phosphoric, electrophoretic dip-coated printed, static powdered with flat coating RAL2000..
Degree of protection:
●Comply with IEC60529, EN60529/10.91 and GB4208-93 standard;
●Small size enclosure with IP66 ( width and height less than 400mm);.
●Width and height over 400mm enclosure with IP55.